NEC MultiSync M491 49" Class HDR 4K UHD Commercial IPS LED Display - Manual (Page 22)

English−18
Installing and Removing the Optional Table Top Stand
WARNINGN: Please refer to “WARNING 8” .
CAUTIONN: Please refer to “CAUTION 5” .
For installation, follow the instructions included with the stand or mounting equipment. Use only those devices recommended by
the manufacturer.
NOTEN: • M431, M491 and M551 use the ST-401 or ST-43M. M651 use the ST-65M.
• For the ST-401 and ST-43M, ONLY use screws which are included with the optional table top stand.
For the ST-65M, ONLY use thumbscrews and attach the stand holders which are included with the optional table top
stand. Install the stand so the long end of the feet face forward.
• The monitor can only be used in the landscape orientation with the tabletop stand.
M431
M491
M551
ST-401 or ST-43M (screws are included)
M651 ST-65M (thumbscrews, screws, and stand holders are included)
M651
Soft cloth
Optional table top stand
Table
Optional stand holder
M431/M491/M551
300 mm