Mounting location, Orientation, Mounting location orientation – NEC MultiSync M491 49" Class HDR 4K UHD Commercial IPS LED Display User Manual
Page 19: Installing a safety wire
English−15
Installing a safety wire
WARNINGN:
Please refer to
CAUTIONN:
Please refer to
NOTEN:
When installing, do not apply pressure to the LCD panel or excessive force to any part of the monitor by pushing or
leaning on it. This may cause the monitor to become distorted or damaged.
Handles for safety wire
(Fasten Force: 120 - 190 N•cm).
Safety wire for landscape position
Safety wire for portrait
position (M651 only)
Mounting Location
WARNINGN:
Please refer to
NOTEN:
Allow for adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate away
from the monitor and from the mounting equipment.
Orientation
• When using the monitor in the portrait position, it should be rotated counterclockwise so that the right side is moved to the
top and the left side is moved to the bottom. Improper ventilation may shorten the lifetime of the monitor.
Power Indicator
WARNINGN:
Please refer to