Adjusting audio volume level – BenQ BH2801 28" Bar-Type Stretched Commercial Display User Manual
Page 21
Basic operations
21
The zoom mode is only for the scenario that the whole input source needs to be
displayed. The zoom mode can be changed in
Setting
>
Device
>
Display
.
Adjusting audio volume level
• To adjust the audio volume level, press
Volume +/-
on the remote control or press
Volume up
/
Volume down
on the front panel of the display.
• Go to
Setting
>
Audio
to adjust the volume. Refer to
for more information.
• 1:1 mode: BH3801 only shows the upper section (1920x600) from the 1920x1080 source.
BH2801 only shows the upper section (1920x360) from the 1920x1080 source. BH2401 only
shows the upper section (1920x190) from the 1920x1080 source. BH3501 only shows the
upper section (1920x130) from the 1920x1080 source.
• FULL mode: It will size in the whole HDMI source screen into the display.