BenQ BH2801 28" Bar-Type Stretched Commercial Display - Manual (Page 17)

Parts of the display and their functions 17
Using the remote control
Installing remote control batteries
Remote control usage tips
• Point and aim the top front of the remote control directly at the display’s remote
control sensor window when you press the buttons.
• Do not let the remote control become wet or place it in humid environments (like
bathrooms).
• If the display’s remote control sensor window is exposed to direct sunlight or strong
light, the remote control may not operate properly. In this situation, change the light
source, readjust the angle of the display or operate the remote control from a location
closer to display’s remote control sensor window.
1. Open the remote control battery compart-
ment cover.
2. Insert the batteries ensuring that the positive
and negative marked battery terminals match
the (+) and (-) marks in the battery
compartment.
Batteries must be purchased separately as they are
not included in the display package.
3. Refit the battery compartment cover.
3m