SENA Bluetooth Mic Supplies Kit - Manual (Page 24)

24
5. PAIRING THE BLUETOOTH MIC & INTERCOM WITH BLUETOOTH DEVICES
Before using the Bluetooth Mic, you need to
do the pairing operation. It can be paired with
Bluetooth mobile phones or Bluetooth stereo
devices such as MP3. This pairing operation is
only required once for each Bluetooth device.
The Bluetooth Mic will remain paired with the
devices and automatically connects to the
paired devices again when they are within
range.
5.1 Mobile Phone Pairing
1. To enter into the voice configuration
menu, press and hold the Center Button
for 12 seconds until the LED shows solid
blue and you hear a voice prompt saying
“Configuration menu” .
2. By tapping the (+) Button, the red and blue
LED flash alternatively and you will hear a
voice prompt saying “Phone pairing” .
3. Search for Bluetooth device on your mobile
phone. Select the Sena Bluetooth Mic in the
list of the devices detected on the mobile
phone.
4. Enter 0000 for the PIN. Some mobile phones
may not ask for the PIN.
5. The mobile phone confirms that pairing has
completed and the Bluetooth Mic is ready to
use. You will hear a voice prompt saying “Your
headset is paired” .
6. If the pairing process is not completed within
three minutes, the Bluetooth Mic will return to
stand-by mode.