SENA Bluetooth Mic Supplies Kit - Manual (Page 16)

16
4. CONFIGURATION SETTING
The voice prompt for each menu item is as
below:
(1) Phone pairing
(2) Multipoint pairing
(3) Phone selective pairing
(4) Media selective pairing
(5) Speed dial
(6) Voice prompt
(7) Sidetone
(8) Noise Control
(9) Auto gain control
(10) Delete all pairings
(11) Factory reset
(12) Exit configuration
You can set the configuration of the Bluetooth
Mic by the voice menu instruction as below.
1. To enter into voice configuration menu, press
and hold the Center Button for 12 seconds
until the LED turns solid blue and you hear
high toned double beeps. You will also hear a
voice prompt saying “Configuration menu” .
2. Tap the (+) Button or (-) Button to navigate
between the menus. You will hear voice
prompts for each menu items as below.
3. You can enable the feature or execute the
command by tapping the Center Button.
4. If you want to exit the configuration
immediately, tap the (+) Button or (-) Button
until you hear a voice prompt saying “Exit
configuration” , then tap the Center Button.