SENA Bluetooth Mic Supplies Kit - Manual (Page 22)

22
4.11 Reset to Factory Default Set-
ting
Voice Prompt “Factory reset”
Factory Default N/A
Enable / Disable Tap the Center Button
To restore factory default settings on the
Bluetooth Mic, tap the (+) Button or the (-)
Button until you hear a voice prompt saying
“Factory reset” . Tap the Center Button to
confirm. The Bluetooth Mic powers off with
a voice prompt saying “Headset reset,
goodbye” and powers on again.
4.12 Exit Voice Configuration Menu
Voice Prompt “Exit configuration”
Factory Default N/A
Enable / Disable Tap the Center Button
To exit voice configuration menu and get back
to stand-by mode, tap the (+) Button or (-)
Button until you hear a voice prompt saying
“Exit configuration” . Tap the Center Button to
confirm.