Primacoustic EcoScapes Slat Wall (98 x 32", Oak, 2-Pack) - Manual

Slat Wall
Wood Veneer Finish PET Acoustic Panels
Installation Manual
Congratulations on purchasing your new EcoScapes
Slat Wall panels from Primacoustic. These high
performance PET Acoustic Panels will absorb ambient
noise and control excess reverberation and echo. The
stylish slat wall design also helps diffuse sound
energy, giving the room a sense of air and space.
Please take a few minutes to read this installation
manual before beginning, to familiarize yourself with
the various installation options and the tools required.
Please refer to
www.primacoustic.com for general
room acoustics information and further details.
Should you have any questions or comments, we
invite you to send an email to
[email protected].
Installation Instructions
Fire Rating
The acoustic felt backing carries a class A/1 fire rating
following certification ASTM E84.0
Wall Preparation
Before beginning the installation process, ensure that
the surface is clean (free of any dust, flaking paint,
loose debris or grime), structurally sound, dry and free
of imperfections.
Care & Maintenance
Start by removing the protective film over the slats
pieces. We recommend adding a protective finish to the
panels if possible. Something like wood oil is perfect as
it protects and keeps the natural look and feel of the
wood. Once this is applied, light dusting or vacuuming
will prevent any dust build-up. If you choose to keep the
panels without a finish, then a dry cloth is suitable for
wiping the panels down.
Tel: 604-942-1001 Fax: 604-942-1010 [email protected]
www.primacoustic.com
Box Contents:
Slat Wall Panels
31.7" x 98.4" x 0.8"
(806mm x 2,500mm x 21mm)
2x
CAUTION: The wood slats are precision
cut, which may leave sharp edges. Gloves
are highly recommended during installation.