Primacoustic EcoScapes Beveled Acoustic Wall Panels (Cherry, 24 x 12 x 1", 12-Pack ) - Manual

Acoustic Wall Panels
Installation Manual
Congratulations on purchasing your new EcoScapes
Wall Panels from Primacoustic. EcoScapes high
performance PET Acoustic Panels are designed to
absorb ambient noise and control excess
reverberation and echo. Please take a few minutes
to read this installation manual before beginning, to
familiarize yourself with the various installation
options and the tools required.
Please refer to
www.primacoustic.com for general
room acoustics information and further details.
Should you have any questions or comments, we
invite you to send an email to
[email protected].
Installation Instructions
Wall Preparation
Before beginning the installation process, ensure that
the surface is clean (free of any dust, flaking paint,
loose debris or grime), structurally sound, dry and free
of imperfections.
Cutting the Panels
Your installation may require you to cut the panels to
fit them around outlets, vents, pipes or other obstacles.
When cutting and fitting panels, consider which areas of
the surface will contain the cut portions and try to apply
the products as symmetrically as possible. It may help
to measure and mark the space beforehand.
Tel: 604-942-1001 Fax: 604-942-1010 [email protected]
www.primacoustic.com
Tools & materials required:
• Utility Knife
• or Circular Saw/
Band Saw
• Straight Edge Guide
• Measuring Tape