Electrolux 1610 - Manual (Page 18)

18
Opening the door/Loading the washing
1. To open the door: carefully pull the handle on the door.
2. Unfold the washing and load it
loosely into the machine. Mix large
and small items.
Important: Do not get any washing
caught between the door and the
rubber seal.
3. Push the door firmly shut.
CURRENT LOAD/DETERGENT display
3
If settings are not undertak-
en for several seconds during
the programme setting proc-
ess or when loading with
laundry, the following indi-
cators appear on the display
when the machine door is
open:
– the maximum permissible loading for the programme marked,
– the actual loading. This is also displayed by the bars (loads of less
than 0.5kg are not displayed),
– and washing agent measurement, with reference to the volume of
laundry, as recommended by the washing agent manufacturer.
If too much laundry has been loaded into the machine, the following
indicator appears in the display OVERLOADING. Please remove the rele-
vant amount of laundry in such cases.
Press any button or turn any knob to undertake more programme
settings.
3
If the laundry is removed again before the programme starts, the CURR.
LOAD display may not change back to 0. If this occurs, please turn the
machine off and switch it back on again after approx. 3 seconds. Reset
the programme and refill machine with laundry.
The CURR. LOAD display goes out if the machine is closed.
DELICATES 30°C
1000 RPM 11:25-12:36
§
##################======]
MAXIMUM LOAD ¶ 3 KG
CURR. LOAD¶¶¶¶¶ ¶¶2 KG
DETERGENT ¶¶¶¶¶¶¶¶¶¶75 %