Creality K1 Max 3D Printer - Manual (Page 11)

Note: The current interface is for reference only. Due to the continuous
upgrading of functions, it shall be subject to the latest firmware UI published
on the official website.
08
① Network Settings ② Time Zone Settings ③
Creality Cloud binding
④ Self-inspection ⑤ Self-testing
Reminder: When the printing time of the device exceeds 300 hours, or if
the printing platform or nozzles have been replaced, the distance between
the platform and nozzles may change that caused the first layer of the
model may not stick firmly, resulting in printing failure. Please calibrate
the platform regularly.
2.3 Power-on guide
⑥ Self-test completed
2. Unboxing