Olympus FL-700WR Electronic Flash - Manual (Page 57)

57
EN
Shooting with the wireless RC fl ash Shooting with the wireless RC fl ash
x
The commander communicates with the receivers using light (a pre-fl ash). The
operating range varies according to the camera/fl ash.
1
Set the camera to the RC mode.
2
Set the communication channel on the camera.
• Refer to the camera manual for details.
3
Press the
#
/ l button. Then, turn the dial to select the
#
(fl ash) mode.
Press the OK button to confi rm.
4
Press the MODE button, and then turn the dial
to select RC.
MODE LED ZOOM
RC
M
mm
28 Off
M
GROUP
A
CH
1
5
Adjust the settings.
Setting the communication channel (CH)
• Select the same channel that you set on the camera.
Press the MODE button. Then, press
HI
on the arrow pad to highlight CH.
Turn the dial to adjust the setting.
• You can select a channel from 1 to 4.
Press the OK button.
Setting the communication group (GROUP)
Press the MODE button. Then, press
HI
on the arrow pad to highlight
GROUP. Turn the dial to adjust the setting.
• You can select Group A, Group B, or Group C.
Press the OK button.
Setting the fi ring angle (ZOOM)
Press the ZOOM button to highlight ZOOM. Then, turn the dial to adjust the
setting.
• When you select A (auto), an automatic setting takes effect. The automatic
setting ranges from 12 mm to 75 mm.
• When the fl ash window is adjusted for bounce fl ash photography, you cannot
select A (auto).
• When you select M (manual), you can set a fi ring angle from 12 mm to 75 mm.
Press the OK button.