Dot Line DL-RLF90 LED Continuous and Flash Ring Light - Manual (Page 6)

-5-
Compatible Devices
With the new hot shoe base technology , the DL-RLF90 Ring Flash will fit a variety of camera models:
including most Nikon / Canon / Panasonic / Olympus brand DSLR and Mirrorless models .
Installing the Ring Flash on the Camera lens
Included are adapter rings to fit lens diameters of 4 6 mm, 52mm , 55mm , 58mm , 62mm , 67mm ,
72mm and 77mm . Other diameter lenses can be used with step-up rings (not included).
1. Choose and install adapter rings according to the diameter of camera lenses. Use care to not cross thread or
overtighten adapter ring.
2. Squeeze the Lock Buttons on the sides of the Ring Flash, move it to the lens, and release the buttons. Make sure the Ring Flash i s
fully mounted and secure on the lens.