Dot Line DL-RLF90 LED Continuous and Flash Ring Light User Manual
Page 4
-3-
Installing and Removing the Flash Diffuser
.
1.
Rotate the diffuser according to the direction indicated by the arrow to open it.
2.
Connect the diffuser to the main body according to the indication on the diffuser.
3.
Rotate the diffuser according to the direction indicated by the arrow to tighten it.
Note: There are two types of diffusers: warming and diffusion.
Installing the Batteries.
1.
Slide the
battery storehouse cover according
to the
direction
indicated
by
the
arrow
to open it.
2.
Install the
batteries
based
on the
indication
on
the battery
cover and ensure
that
the
positive
and
negative poles
are
connected correctly.
3.
Slide
the
battery storehouse cover according
to the
direction
indicated by
the arrow
to
close
it.
Note: Use four standard AA batteries only
.
Do not use batteries with shell damage to prevent short circuits
or leakage
.