Eclipse - Fujitsu Ten CD7200 MKII - Manual (Page 72)

72
Various Settings
When the 4-speaker layout is selected
When the 3 way speaker layout is selected
ATTENTION
It is not possible to set more than one band in
the same channel and median frequency.
Either change the median frequency of the
current band, or change the median frequency
of another band.
The PEQ setting mode is activated.
Each time the button is pressed, the
band changes in the following order.
When the 4-speaker layout is selected:
1 → 2 → 3 → 4 → 5 → 6 → 7 → 1 → www
When the 3 way speaker layout is
selected:
Hi 1 → Hi 2 → Hi 3 → Hi 4 → Hi 5 →
Mid 1 → Mid 2 → Mid 3 → Mid 4 → Mid
5 → Low → Hi 1 → www
Up :
Increases the level.
Down :
Decreases the level.
Each time the button is pressed, the Q
curve pattern changes in the following
order.
WIDE ↔ Mid WIDE ↔ NORMAL ↔
Mid NARROW ↔ NARROW ↔
WIDE ↔ www
Band Adjustable frequency (Hz)
1 63, 80, 100
2 125, 160, 200
3 250, 315, 400, 500
4 630, 800, 1 k, 1.25 k
5 1.6 k, 2 k, 2.5 k, 3.15 k
6 4 k, 5 k, 6.3 k, 8 k
7 10 k, 12.5 k, 16 k
Channel Band Adjustable frequency (Hz)
Hi
Hi 1
200, 250, 315, 400, 500,
630, 800, 1 k, 1.25 k, 1.6 k,
2 k, 2.5 k, 3.15 k, 4 k, 5 k,
6.3 k, 8 k, 10 k, 12.5 k, 16 k
Hi 2
Hi 3
Hi 4
Hi 5
Mid
Mid 1
63, 80, 100, 125, 160, 200,
250, 315, 400, 500, 630,
800, 1 k, 1.25 k, 1.6 k, 2 k,
2.5 k, 3.15 k, 4 k, 5 k, 6.3 k,
8 k, 10 k, 12.5 k, 16 k
Mid 2
Mid 3
Mid 4
Mid 5
Low Low
20, 25, 31.5, 40, 50, 63, 80,
100, 125, 160, 200, 250
1
Press the [SELECT] (Up/Down)
button to select PEQ.
2 Press the [ENTER] button.
3
Press the [ENTER] button to select
the band to be adjusted.
4
Press the [SELECT] (Right/Left)
button to select the frequency to
be adjusted.
5
Press the [SELECT] (Up/Down)
button for less than one second to
adjust the frequency level.
6
Press the [SELECT] (Up/Down)
button for more than one second
to adjust the Q curve pattern.
7
Repeat the steps 3 to 6 to change
the settings for each channel and
band.