Enviro 50-1386 - Manual (Page 5)

5
Installation
R
EMOVING
P
ELLET
S
TOVE
F
ROM
P
ALLET
:
Figure 1: Removing Stove From the Pallet.
Use a flathead screwdriver or 5 /
16
” socket to remove the
four (4) screws that secure the Empress FPI to the pallet.
Two (2) of the screws are shown in Figure 1 and the other
two (2) are in the same location but on the opposite side;
behind the circuit board and beside the power cord.
D
IMENSIONS
:
19 13 / 16 "
(503mm)
21 13 / 16 "
(554mm)
30"
(762mm)
14 15 / 16 "
(379mm)
8 3 / 4 "
(222mm)
15 1 / 16 "
(383mm)
27 15 / 16 " (710mm)
20 7 / 8 " (530mm)
29 13 / 16 "
(757mm)
27"
(686mm)
22 9 / 16 "
(573mm)
30 11 / 16 " (779mm)
42" (1067mm)
30 15 / 16 " (786mm)
13 1 / 8 "
(334mm)
7 11 / 16 "
(196mm)
Figure 2: Dimensions of Empress Fireplace Insert.