Nikon 20x120 IV Telescopic Binoculars with Fork Mount - Manual (Page 10)

10
Jp
En
HANDLING AND OPERATION PRECAUTIONS
• Do not open the prism box beyond the limit. Also, do not rotate rotating parts such as knobs and the
diopter adjustment rings beyond their limits.
• Do not subject this product to physical shock.
• If you subject the product to strong physical shock by dropping it during attachment or removal, consult
with your local dealer or a Nikon authorized service representative immediately.
• When changing the orientation or angle of this product, move it carefully within the movable range
without applying excessive force so that the movable parts are not damaged.
• When changing the orientation or angle of this product, make sure to loosen the screws first without
applying excessive force. After adjustment, make sure to tighten the screws to secure the body.
CARE AND MAINTENANCE PRECAUTIONS
● LENS
Be careful that you do not directly touch the lens surface with your hands when cleaning it. Remove dust or
lint with a blower*. For fingerprints or other stains that cannot be removed with a blower, wipe the lens with
a dry soft cloth or cleaning cloth for eyeglasses, using a spiral motion that starts at the center of the lens and
working towards the edges. Wiping too firmly or wiping with a hard material may damage the lens. If this
fails, gently wipe the lens using a cloth lightly dampened with commercial lens cleaner.
Be careful because the quality of the lens surface coating in particular may change and deteriorate if it is air
dried with water drops present.
* A rubber cleaning tool that blows air from a nozzle.
● MAIN BODY
Remove dust trapped in the rotating parts of the diopter adjustment rings, etc. with a soft brush.
After gently removing dust with a blower, clean the body surface with a soft, clean cloth. After use at a
seaside, wipe off salt that may be on the body surface with a damp, soft, clean cloth, and then wipe with a
dry cloth. Do not use benzene, thinner, or other cleaners containing organic solvents.
Nomenclature (body, fork mount)
1 Objective lens
2 Body fixing screw
3 Tilting clamp screw
4 Rotation clamp screw
5 Fork mount
6 Eyepiece lens
7 Horn-shaped eyecup
8 Diopter adjustment ring
9 Prism box
0 Body
4
3
7
6
2
1
8
9
0
2
5
ITEMS SUPPLIED
Binocular telescope body ×1
Eyepiece lens cap ×2 *1
Objective lens cap ×2 *1
Horn-shaped eyecup ×2 *1
Vinyl cover ×1
Fork mount ×1 *2
*1 Attached to the body at the time of purchase.
*2 May be not included in the items supplied depending on the purchased set.