Nikon ProStaff Team Realtree 3-9x40 - Manual

Nikon Riflescope
ProStaff
Team Realtree
3-9x50
3-9x40
2-7x32
4x32
Instruction Manual
Congratulations on your choice of a Nikon RIFLESCOPE. Your new scope is the
finest example of Nikon’s rugged and durable construction and precision bright
optics; important qualities for a serious shooter’s riflescope.
Whether you use your scope for hunting or for target shooting, the procedure for
mounting is identical. You should acquire a set of high quality steel mounting
rings which have a standard diameter of 25.4 mm (1inch). Follow the ring
manufacturer’s instructions for mounting procedures. After mounting the scope
on your rifle, follow the procedures for reticle alignment.
Caution
(1) Do not look at the sun through the riflescope. It will permanently damage
your eye. This precaution applies to all optical devices such as cameras and
binoculars.
(2) The riflescope is effectively sealed against moisture and dust. You may use
your scope safely either in the rain or in dusty climates. To preserve the
appearance of the scope, we suggest that it be dried and cleaned prior to
storage. Use a soft cloth for cleaning metal surfaces and use photographic lens
tissue to clean the scope’s lenses.
When setting the reticle for hunting, you should determine your standard range
and then adjust the reticle based upon that target distance. For targets which
vary from the standard distance you may simply adjust the position of the reticle
in relation to your target, or you may wish to use the procedure for trajectory
compensation. It’s up to your personal preference.
We hope that you will enjoy your new Nikon RIFLESCOPE for many years to
come. Enjoy using it, and above all, always follow safe shooting procedures!