Austrian Audio Hi-X25BT Professional Wireless Bluetooth Over-Ear Headphones User Manual
Page 5
How to Replace the Ear Cushions
Using the Hi-XBCUK Cushion Replacement Kit (separately available) you can easily replace your Hi-
X25BT’s earpads yourself.
Note: The ear cushions are mounted with screws – please do not pull on the earpads without
loosening the screws and please follow the instructions as described below.
1.
Start by taking out the foam inlays on both the right and left side. Pinch
them with two fingers and you can easily pull them out.
2.
Use a Torx® T6 screwdriver to loosen the four screws on the inner plate.
It’s not necessary to unscrew the screws completely.
3.
Now you can carefully pull out the ear cushions and mount the
new ones. Please make sure that the cushion’s rim is
completely covered by the inner plate.
4.
Tighten the screws and carefully push the inner plate
downwards to lock the cushions into position. Then insert
the new foam inlays.