Denon PerL True-Wireless Earbuds - Manual (Page 8)

Bluetooth ® operation
o Connecting your earbuds with Bluetooth
You will need to connect your earbuds to your mobile device via Bluetooth
to access the Denon Headphones app and personalize your earbuds.
To connect your earbuds via Bluetooth for the first time:
1
Remove your earbuds from the charging case and
place them in your ears to turn them on.
Your earbuds will automatically enter discoverable mode and be
pairable if it has not been previously connected to a device.
2
On your mobile device go to “Settings” > “Bluetooth”
3
Select “Denon PerL XXX”.
XXX is the Denon PerL unique pairing number.
o Swapping between Bluetooth devices
You can pair to your earbuds by entering discoverable mode. Your
earbuds will automatically enter discoverable mode and be pairable for 2
minutes when removed from the charging case if it has not been
previously connected to a device. Alternatively, you can also enter
discoverable mode by tapping and holding the touch buttons on both
earbuds simultaneously for 2 seconds, or via “Device Settings” in the
Denon Headphones app.
When your earbuds is in discoverable mode, select “Denon PerL XXX” in
the Bluetooth settings of any device you would like to switch to. A voice
prompt will announce “Bluetooth device changed.” You have now
swapped your connection. Your earbuds will remember up to 8 devices,
allowing you to easily switch between them without having to re-enter
discoverable mode after initial pairing. Simply select “Denon PerL XXX” in
the Bluetooth menu of any previously paired device to reconnect.
Contents Basic part Advanced part Headphones app Troubleshooting Appendix
8