Nikon AF-S NIKKOR 16-35mm f/4G ED VR Lens User Manual

Page 24

0.5 EV steps. When using screens other
than type B or E, “Other screen“ must be
selected even when the required
compensation value is “0“ (no
compensation required). For F5 cameras,
compensate using Custom Setting #18 on
the camera body.

See user’s manual of the camera body for
more details.

Blank box means not applicable. Since type
M screen can be used for both macro-
photography at a magnification ratio of 1:1
or above and for photomicrography, it has
different applications than other screens.

Important

• For F5 cameras, only EC-B, EC-E, B, E, J, A,

L focusing screens are usable in Matrix
Metering.

Lens care

• Be careful not to allow the CPU contacts to

become dirty or damaged.

• If the lens mount rubber gasket is

damaged, be sure to visit the nearest
Nikon-authorized service representative for
repair.

• Clean lens surfaces with a blower brush. To

remove dirt and smudges, use a soft, clean
cotton cloth or lens tissue moistened with
ethanol (alcohol) or lens cleaner. Wipe in a
circular motion from the center to outer
edge, taking care not to leave traces or
touch other parts of the lens.

• Never use organic solvent such as thinner

or benzene to clean the lens.

• NC filters are available to protect the front

lens element. The lens hood also helps to
protect the front of the lens.

• When storing the lens in its flexible lens

pouch, attach both the front and rear lens
caps.

• When the lens is mounted on a camera, do

not pick up or hold the camera and lens by
the lens hood.