Profoto B1X 500 AirTTL 1-Light To-Go Kit - Manual (Page 14)

B1X
14
www.profoto.com
Air Accessories compatible with B1X (For detailed operation
instructions refer to user guide of respective accessory).
Optional
Profoto Air
accessories Usable features in combination with B1X
500 AirTTL
Flash
sync Remote
control TTL
(Automatic
flash setting) HSS (High
Speed
Sync)
Air Remote TTL* X X X X
Air Remote* X X
Air Sync* X
Air USB** X
*Optional Camera mounted transmitters. Check Profoto.com for TTL supported cameras.
** Dongle for using Profoto Air Studio Software
Slave Sync operation
When ‘Slave’ is shown in the Sync/Air setting section [21] on the
Display [13], the B1X unit senses the flash release, as well as IR signals
from most IR sync transmitters.
1. If the Sync/Air setting section [21] is blank, press the SYNC button
[18] once to activate wireless sync. ‘AIR’ or ‘Slave’ is now displayed.
2. Ensure that ‘Slave’ is displayed. If not, press and hold the SYNC
button [18] until ‘Slave’ is displayed.
Cable Sync operation
Sync via cable is possible in all sync modes. Connect a sync cable from
the camera or flash meter to the Sync Connector [11] on the B1X unit.