Profoto D2 500Ws AirTTL Monolight - Manual (Page 10)

D2
500
/1000 Air
TTL
10
www.profoto.com
Operation
Quick guide
For detailed operating instructions, see the subsequent sections.
1. Fit the stand adapter [12] to a light stand and secure it with the
clamp screw [13].
2. Adjust the tilt position of the D2 unit by loosening the tilt-lock knob
[11].
3. Connect the power cable to the power supply input [18] and then
to the AC mains supply.
4. Push the ON button [4].
5. Set the flash light output by using the dial [5] or use the optional
Profoto Air Remote TTL to set the output.
6. Release a test flash by pushing the test button [7].
7. Change the settings by using the SETTINGS button [6] and the
dial [5].
Main menu
The display [1] shows the main menu, with the current settings.