Connecting to x86 sdb target – Ericsson UM10067 User Manual
Page 21
UM10067
ISP1760; ISP1761 Win CE 5.0 User Installation Guide
3. From the %ProgramFiles%\Windows CE Platform Builder\5.00\CEPB\Utilities
directory, run CEPCBoot.144. You can also run CEPCBoot.144 from the command
line.
4. If your floppy disk is not blank and formatted, check format before making disk box in
the Web Image NT window. This causes WebSetup.exe to format the boot floppy
disk with MS-DOS 6.22 before copying the CEPCBoot.144 disk image to the boot
floppy disk.
5. In the Web Image NT window, choose the A: drive. This copies the CEPCBoot.144
disk image to the boot floppy disk.
6. Choose Cancel to close the Web Image NT window.
9. Connecting to x86 SDB target
1. On the Target menu, select Connectivity Options.
Fig 27. Step 1.
2. If you want to download the image through Ethernet and want the debugger to be
KdStub, set Debugger to KdStub, Download and Transport to Ethernet.
UM10067_3
© ST-ERICSSON. All rights reserved.
User manual
Rev. 03 — 12 October 2009
21 of 2
5