Ericsson UM10067 - Manual (Page 18)

UM10067
ISP1760; ISP1761 Win CE 5.0 User Installation Guide
6.1 PCI bus mode
The software is tested and proven on the PLX9054 bridge. PCI bridge chip PLX9054 in
the ISP176x PCI kit is used for the PCI host to transparently access the ISP176x.
PLX9054 requests PCI bus resources, such as I/O ports, interrupt line, on behalf of the
ISP176x. PLX9054, however, can only request one interrupt line for the ISP176x.
If required, customize file P1761bus.reg under WINCE500\3rdparty\ST-
ERICSSON\PhISP176xbus\.
Change the following, depending on your PCI bridge settings:
• VendorID
• DeviceID
• SubVendorID
• SubsystemID
• Class
• SubClass
• ProgIF
For example, the P1761bus.reg file looks as follows:
; =========================================================
; USB - P1761 Bus PCI Bus Driver for PCI kit only
; =========================================================
; HC : 1: support Host Controller. 0: none
; DC : 1: support Device Controller. 0: none
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\P1761BUS]
"Dll"="p1761bus.dll"
"Order"=dword:0
"Class"=dword:06
"SubClass"=dword: 80
"ProgIF"=dword:00
"VendorID"=multi_sz:"10b5"
"DeviceID"=multi_sz:"5406"
"SubVendorID"=multi_sz:"10b5"
"SubsystemID"=multi_sz:"9054"
"HC"=dword:1
"DC"=dword:0
; =========================================================
; USB - ST-ERICSSON ISP17161 driver Instance to create DCD or HCD
; =========================================================
; Used to create P1761HCD instance
UM10067_3 © ST-ERICSSON. All rights reserved.
User manual Rev. 03 — 12 October 2009 18 of 25