Philips 439P1 42.5" 4K HDR USB Type-C Docking Monitor - Manual (Page 18)

16
2. Setting up the monitor
When the sub source is
not detected.
A
(main)
Note
The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode. If
you expect to see full screen side by
side, adjust your devices resolutions as
pop up attention resolution, you will
able to see 2 devices source screen
project to this display side by side
without black strips. Note the analog
signal is not support this full screen in
PBP mode.
• PIP Size: When PIP is activated,
there are three sub-window sizes to
choose: [Small], [Middle], [Large].
B
A
(main)
Small
Middle
Large
• PIP Position: When PIP is activated,
there are four sub-window positions
to choose.
Top-Right Bottom-Right
B
A
(main)
A
(main)
B
Top-Left Bottom-Left
B
A
(main)
A
(main)
B
• Swap: The main picture source and
the sub picture source swapped on
the display.
Swap A and B source in [PIP] mode:
B
A
(main)
↔
B
(main)
A
Swap A and B source in [PBP] mode:
B A
(main)
↔
A B
(main)
• Off: Stop MultiView function.
SUB SOURCE
SOURCE
Inputs
MAIN
POSSIBILITY (xl)
(xl)
HDMI-1
HDMI-1
HDMI-2
HDMI-3
DisplayPort
USB C1
HDMI-2 HDMI-3 DisplayPort USB C1
Note
When you do the SWAP function, the
video and its audio source will swap at
the same time.