Philips 439P1 42.5" 4K HDR USB Type-C Docking Monitor - Manual (Page 12)

10
2. Setting up the monitor
4
The remote control is powered by
two 1.5V AAA batteries.
To install or replace batteries:
1. Press and then slide the cover to
open it.
2. Align the batteries according to the
(+) and (–) indications inside the
battery compartment.
Replace the cover.
Note
The incorrect use of batteries can result
in leaks or bursting. Be sure to follow
these instructions:
• Place “AAA” batteries matching the
(+) and (–) signs on each battery to
the (+) and (–) signs of the battery
compartment.
• Do not mix battery types.
• Do not combine new batteries with
used ones. It causes shorter life or
leakage of batteries.
• Remove the dead batteries
immediately to prevent them
from liquid leaking in the battery
compartment. Don’t touch exposed
battery acid, as it can damage your
skin.
• If you do not intend to use the
remote control for a long period,
remove the batteries.