Lenovo Legion Y32p-30 31.5" 4K HDR 144 Hz Gaming Monitor - Manual (Page 24)

Chapter 2 Adjusting and using your monitor 2-11
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer
documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This is normal and
the image can be readjusted using automatic image setup and the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently configured to a
display mode outside the range of this monitor, you may need to re-attach the CRT monitor
temporarily until you have re-configured the system; preferably to 3840x2160 at 144Hz, which is
the Native Resolution Display mode. The display modes shown below have been optimized at
the factory.
Table 2-3. Factory set display modes
Addressability Refresh rate
640 x 480 60 Hz
720 x 400 70 Hz
720 x 480 60 Hz
800 x 600 60 Hz
1024 x 768 60 Hz
1280 x 720 60 Hz
1280 x 800 60 Hz
1280 x 1024 60 Hz
1440 x 900 60 Hz
1600 x 900 60 Hz
1600 x 1200 60 Hz
1680 x 1050 60 Hz
1920 x 1080 60 Hz
1920 x 1200 60 Hz
2560 x 1440 60 Hz
2560 x 1440 100 Hz
2560 x 1440 120 Hz
2560 x 1600 60 Hz
3840 x 2160 60 Hz
3840 x 2160 100 Hz
3840 x 2160 120 Hz
3840 x 2160 144 Hz