Electrolux 3193-4GA - Manual (Page 34)

Installing and connecting
34
Reversing the Door
The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
1 Warning! When changing the side at which the door opens, the appli-
ance may not be connected to the mains. Remove plug from the mains
beforehand.
0 Lay the left side of the appliance
onto a soft pad, e.g. rug, blanket
etc.
0 Turn pivot pin out of lower door
pivot.
Keep the spacing washer bet-
ween the door and the bearing.
0 Romove door carefully and set
aside.
0 Turn the 4 phillips head screws
out of the base and remove the
base.
0 Overturn the plinth’s blind
bearing from left to the right.
0 Unscrew the door bearing and
transfer it to the left.