Dell UltraSharp 49 U4924DW 49" WQHD Ultrawide Curved Monitor - Manual (Page 45)

Setting up the monitor
│
45
Using the USB hub
When you want to use the monitor’s built-in USB hub, press on the USB hub
module and then release. The USB hub module will slide down.
Connecting your monitor
WARNING: Before you begin any of the procedures in this section,
follow the
Safety instructions .
NOTE: Dell monitors are designed to work optimally with the Dell-
supplied cables inside the box. Dell does not guarantee the video quality
and performance if non-Dell cables are used.
NOTE: Route the cables through the cable-management slot before
connecting them.
NOTE: Do not connect all cables to the computer at the same time.
NOTE: The images are for the purpose of illustration only. The
appearance of the computer may vary.
To connect your monitor to the computer:
1. Turn Off your computer and disconnect the power cable.
2. Connect the DisplayPort, HDMI, or USB Type-C cable from your monitor to
the computer.