Asus ProArt Display OLED PA27DCE-K 26.9" 4K HDR Monitor with Color Calibrator - Manual (Page 21)

2-6 Chapter 2: Setup
2.4 Connecting the cables
Connect the cables according to the following instructions:
80W
• To connect the power cord: Connect one end of the power cord securely to the
monitor’s AC input port, the other end to a power outlet.
• To connect the HDMI/DisplayPort/USB Type-C/USB Type-A cable:
a. Plug one end of the HDMI/DisplayPort/USB Type-C/USB Type-A cable to
the monitor’s HDMI/DisplayPort/USB Type-C/USB Type-A jack.
b. Connect the other end of the HDMI/DisplayPort/USB Type-C* cable to
your device's HDMI/DisplayPort/USB Type-C jack.
It is suggested to use USB certified Type-C 4K/ support 4A (or up to 4A) cable.
If the signal source supports DP Alt mode, all video, audio and data signal can
be transmitted.
• To use the earphone: Connect the end with plug type to the monitor’s earphone
jack when an HDMI/DisplayPort/USB Type-C signal is fed.