Acer CB382CUR 37.5" 1600p Curved Display - Manual (Page 27)

English
Performance
Mode - User
OSD
System
Picture
Color
Over Drive
Audio
Normal
Off Aim point
Performance
Save setting to...
Enter Move
X
On AMD FreeSync
Off VRB
Off Ultra-Low Latency
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Performance from the OSD.Then toggle
to the right to navigate to the element you wish to adjust and press the joystick to enter
it.
3. Toggle to the left or right to adjust the sliding scales.
4.
OD: Select Off, Normal, or Extreme.
5. AMD FreeSync : To control support AMD FreeSync or not, default is On..
---------------------------------------------------------------------------------------------------------
Note: Only in the Support AMD FreeSync environment the control the AMD
FreeSync (On/Off) effect, such as in NVIDIA or Intel graphic card, Non-AMD
FreeSync Environment no effect.
6. VRB: To choose whether to support dynamic picture more clean control, default is Off.
---------------------------------------------------------------------------------------------------------
Note:
1. PIP/PBP mode is not support VRB.
2. HDR setting: "Auto" is not support VRB.
3. VRB set "On", when to turn on AMD FreeSync, will auto set VRB is "Off".
4. VRB set "On", when to adjustment (Brightness, Blue Light, ACM), will auto
set VRB is "Off".
5. VRB function does not affect the (Logo, Aim Point, Message and Input Icon)
brightness.
6.
VRB setting "On", when detection of Input Timing <75Hz, will auto off the
VRB and gray out to disable.
7. VRB = (Normal or Extreme), because the IC control dynamic picture is
cleaner, so the overall Brightness will be dark, "Extreme" will be darker than
“Normal”.
7. Aim point: Show an Aim point on the screen for shooting games.