Acer CB382CUR 37.5" 1600p Curved Display - Manual (Page 24)

English
Selecting the input
Open the Input control and select HDMI2.0, DP ALT, DP In or Auto Source. When you are
done, press the joystick to exit current page and store.
Input
Input
HDMI2.0
Auto Source
Off
Enter Move
Main menu
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Picture from the OSD. The
toggle to the right to navigate to the element you wish to adjust and press the joystick to
enter it.
3. Toggle the joystick to the left or right to adjust the sliding scales.
Information Hot Key : Show Monitor Information and Reset control function.
Modes Hot Key : To change Modes Hot Key menu.
Exit Hot Key
X
: To exit current page and store.
Picture
Mode - User
80
50
Off
Off
Off
Color
Audio
Performance
OSD
System
Brightness
Contrast
Blue Light
ACM
Super Sharpness
Picture
Save setting to...
Enter Move
9 Black Boost
X Off HDR
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Blue
Light, ACM, HDR and Super Sharpness.
5. Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------