Erica Synths Pico Input Eurorack Module (3 HP) - Manual (Page 2)

Connect audio signals from an
external source here! The Left
channel is stereo 3,5mm jack, so you
have an advantage of connecting both
stereo signals or two independent
mono signals.
Adjust Left channel gain with this
potentiometer. The gain of the each
channel is configurable by replacing
jumpers on the main PCB of the module.
Factory setting with a jumper
inserted is +40dB. For +20dB gain
remove a jumper.
Adjust Right channel gain with this
potentiometer
This is Left output
This is Right output
LEDs give visual feedback on the
signal level. The green LED means 0dB,
red - +40dB boosting
PICO
INPUT
PICO
INPUT
IN L/
STEREO
IN R
GAIN L
GAIN R
OUT