Black cv tools – Erica Synths Black CV Tools Mixer, Scaler, Waveshaper Eurorack Module User Manual
Page 2
JUMPER CONFIGURATION
SAFETY INSTRUCTIONS
DISPOSAL
Please follow the instructions for use of this Erica Synths module
below, ‘cause only this will guarantee proper operation of the
module and ensure warranty from Erica Synths.
Water is lethal for most of the electric devices, unless they
are made waterproof. Erica Synths module is NOT intended
for use in a humid or wet environment. No liquids or other
conducting substances must get into the module. Should this
happen, the module should be disconnected from mains power
immediately, dried, examined and cleaned by a qualified
technician.
Do not expose the module to temperatures above +50° C or
below -20° C.
Transport the instrument with modules installed carefully, never
let it drop or fall over. Warranty does not apply to modules with
visual damages.
The module has to be shipped in the original packaging only.
Any module shipped to us for return, exchange and/or warranty
repair has to be in its original packaging. All other deliveries
will be rejected and returned to you. Make sure you keep the
original packaging and technical documentation.
You will find Erica Synths terms of warranty at
http://ericasynths.lv/en/terms/
Items for return, exchange and/or warranty repair have to be sent
to: Erica Synths, Andrejostas Str. 43, Riga, Latvia, LV-1045
This device complies to the EU guidelines and is manufactured
RoHS conforming without use of lead, mercury, cadmium and
chrome. Nevertheless, this device is special waste and disposal in
household waste is not recommended.
Designed and made in Latvia.
User manual by Girts Ozolins@Erica Synths.
Design by Edmunds Pavlovskis.
Copying, distribution or any commercial use in any way is
prohibited and needs the written permission by Erica Synths.
Specifications are subject to change without notice.
In case of any questions feel free to contact us via
e-mail:
Check out other Erica Synths modules & devices at
www.ericasynths.lv
NORM A1
jumper.
default:
not set. This jumper provides an option for CV MIXER A to be capable of optionally offsetting the output up by +5V or down
by -5V. This is very useful in cases where 0..+10 CV range needs to be moved to -5..+5V range and vice versa. Just set this NORM A1 jumper to “+5V” or
“-5V” side and then when nothing is plugged in IN A 1 socket, mixer’s output will be offset by +5V or -5V respectively, and this way provides precision
offset to any CVs connected to IN A 2 and/or IN A 3 inputs. And whenever you will need to mix CVs without offset, just use the IN A 1 socket, and this offset
will not be applied.
MATH IN A
and
MATH IN B
jumpers.
default:
set to “mix”. These jumpers allow to select wether MIN and MAX functions are operated from MIX or
SCALED signals. There are individual jumpers for A and B input terms so that you can choose to have only one to be scaled, and one to be direct from a
respective mix. This is useful, for example, if you want to use the MIN or MAX as a limit function with manually adjusted threshold using the OFFSET knob.
As an another example, you can use MIN and MAX functions for some wild transformations when both input terms are set to SCALED.
MIN OUT SELECT
and
MAX OUT SELECT
jumpers.
default:
set to “min” and “max”. Whenever you might need more MIX outputs to be used as a splitter,
or want a simultaneous inverse output of a respective MIX output, just set these jumpers and MIN and MAX outputs will become additional mix or inverse
mix outputs. By moving these jumpers you can replace MAX output with MIX A or INVERSE MIX A; and MIN output with MIX B and INVERSE MIX B.
BLACK CV TOOLS