Evo Fitness 50551 - Manual (Page 8)

Step 1:
Only hand tighten fasteners for
now. You will be prompted to fully
tighten all fasteners later.
Place the Base Frame (1) on the floor.
Cap the Base Frame (1) with one 2"
Sq End Cap (48) and two 1-3/4" Sq
End Plugs (49). Insert two 1" Plastic
Bushings (60) into the holes in the
Base Frame (1).
Cap the Side Base (2) with one 2" Sq
End Cap (48) and one 2" Sq End Plug
(50).
Cap the Upright (3) with one 1-1/2"
End Cap (53) and one 2" x 3" Rect
End Plug (52). Attach the Adj Stopper
(63) to the Upright (3).
Attach the Side Base (2) and Upright
(3) to the Base Frame (1) using four
1/2" x 3-1/8" Hex Head Bolts (71), six
1/2" Washers (89) and two 1/2" Nylon
Nuts (93). Attach the Side Base (2)
to the Base Frame (1) using two 1/2"
x 3-1/8" Hex Head Bolts (7), three
1/2" Washers (89) and one 1/2" Nylon
Nut (93).
assembly instructions
-8-
ASSEMBL
Y