Evo Fitness 50551 - Manual (Page 13)

assembly instructions
-13-
Step 6:
Insert both Guide Rods (22) through
the Rubber Doughnuts (57) and into
the holes in the Base Frame (1).
Carefully stack the Weight Plates (12)
one at a time by lifting them to the top
of the Guide Rods (22), inserting the
rods through the holes in the weights
and slowly lowering each weight down.
Attach the Select Rod (23) to the Top
Weight Plate (13) using the Top Plate
Bolt (67). Slide the Top Weight Plate
(13) and Select Rod (23) onto the
weight stack by inserting the Guide
Rods (22) through the holes in the Top
Weight Plate (13) and slowly lowering
them down. Lock the Select Rod (23)
in place with the Select Pin (66).
ASSEMBL
Y