Evo Fitness 50551 - Manual (Page 17)

Step 11:
ROUTING THE TOP CABLE:
Insert the bolt end of the cable through
the slot in the tube (ball outside). Route
the cable over pulley T1, continue through
pulley T2, down and around pulley T3, up
and around pulley T4, down and screw
the cable bolt end into the threaded end
of the Select Rod (23) at least 7 complete
turns.
ASSEMBL
Y
assembly instructions
-17-
TOP CABLE
PATH
TOP CABLE (42) ball end bolt end
T1
T2
T3
T4
T5
FIG-T1 FIG-T2
FIG-T3 FIG-T4
FIG-T5
INSERT CABLE THROUGH
SLOT IN TUBE, LEAVE THE
BALL ON THE OUTSIDE