SPL Iron V2 Two-Channel Tube Mastering Compressor (Black/Silver) - Manual (Page 27)

27
Security Advices
Handling
Operate the controls and switches only as described in the manual. Incorrect adjust-
ments outside safe para meters can lead to damage. Never use excessive force on the
switches or controls.
Do not insert your fingers or hands in any gaps or openings of the device.
Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps
or openings of the device. If this happens, power down immediately and unplug the
power cord from the mains socket outlet. Then have the device inspected by a qualified
professional.
Do not expose the device to excessive dust or vibrations or extreme cold or heat (such as
direct sunlight, near a heater or in a car during the day) to prevent the possibility of caus-
ing damage to the housing, the internal components or unstable operation.
If the ambient temperature of the device suddenly changes, condensation can occur (if
for example the device is relocated or is affected by a heater or air conditioning).
Using the device while condensation is present may result in malfunction. Do not power
on the device for a few hours until the condensation is gone. Only then it is safe to power
on.
Cleaning
Disconnect the device from your mains socket outlet before cleaning.
Do not use any solvents, as these can damage the chassis finish. Use a dry cloth, if nec-
essary, with an acid-free cleaning oil.
Disclaimer
The company names and product names in this manual are the trademarks or registered
trademarks of their respective companies.
SPL and the SPL Logo are registered trademarks of SPL electronics GmbH.
SPL cannot be held responsible for damage caused by improper use or modification of
the device or data that is lost or destroyed.
Notes on Environmental Protection
At the end of its operating life, this product must not be disposed with regular
household waste but must be returned to a collection point for the recycling of
electrical and electronic equipment.
The wheelie bin symbol on the product, user manual and packaging indicates
that.
For proper treatment, recovery and recycling of old products, please take them to appli-
cable collection points in accordance with your national legislation and the Directives
2012/19/EU.
The materials can be reused in accordance with their markings. Through reuse, recycling
of raw materials, or other forms of recycling of old products, you are making an important
contribution to the protection of our environment.
Your local administrative office can advise you of the responsible waste disposal point.
This directive only applies to countries inside the EU. If you wish to discard devices outside the
EU, please contact your local authorities or dealer and ask for the correct method of disposal.
WEEE-Reg-No.: 973 349 88