Prior to initial start-up – Electrolux 3791-6 KG User Manual

Page 17

Text mode
Original mode

Prior to Initial Start-Up

Before connecting the appliance to the mains and putting it into ope-
ration for the first time, leave the appliance to stand for 30 minutes if
it was transported upright. After transport on its side, the appliance
must be left to stand for 2 hours before putting it into operation. This is
necessary to allow the oil to flow back into the compressor. Otherwise
the compressor may be damaged.

1. Please clean the appliance interior and all accessories prior to initial

start-up (see section: "Maintenance and Cleaning").

This manual is related to the following products:

3798-6 KG