Electrolux 3791-6 KG - Manual (Page 11)

Installation
11
The refrigerator/freezer needs ventilation
Air is fed under the door through the
vent slots in the base and is
exhausted upwards along the back
wall. To ensure proper air circulation
never cover or alter the vent
openings.
Important! If the appliance is
installed under a hanging cabinet, a
clearance of at least 10 cm between
the top of the appliance and the
cabinet above it must be maintained.
Please check whether, after installing
your appliance and especially after
reversing the door, the door seal seals
tightly. A badly fitting door seal may
lead to heavy frosting and a higher
power consumption (see also "What
to do if ...“).
Appliance Alignment
0
1. The appliance must be level. Please compensate for unevenness in the
floor by turning the two adjustable feet at the front.
Fitting the Plinth
0
1. Take the plinth cover out of the fridge compartment.
2. Fit the plinth cover with the freezer door open. To do this, follow the
instructions that are supplied with the plinth cover.