Sony a7C II Mirrorless Camera (Silver) User Manual
Page 22
22
[HDR Output]
[Auto]: Outputs HDR signal depending on
contents and HDMI-SINK capability.
Conversion function is applied when content
is HDR and HDMI-SINK does not support HDR.
[Off]: Always output SDR.
[Dolby Vision Output]
[On]: Output 4K/Dolby Vision signals via 4K/
Dolby Vision-compatible devices.
[Off]: Automatically outputs HDR signals
when you connect any 4K/HDR or 4K/Dolby
Vision-compatible equipment.
When [On] is selected, 3D playback is not
available.
[Display Type]
[TV]: Select this when the player is connected
to TV.
[Projector]: Select this when the player is
connected to Projector.
[HDR Conversion] will be adjusted according to
the display type you select. Even though same
setting value of [HDR Conversion] is selected,
dynamic range of picture is different.
[Output Video Resolution]
Normally select [Auto].
[24p Output]
Outputs 24p video signals only when you
connect a 24p-compatible TV via an HDMI
connection and the [Output Video
Resolution] is set to [Auto], [1080p] or [4K].
[Ultra HD Blu-ray/BD-ROM]
[Auto]: Outputs 24 Hz video signals only
when you connect a 24p-compatible TV using
the HDMI OUT jack.
[On]: Turns on the function.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[DVD-ROM]
[Auto]: Outputs 24 Hz video signals only
when you connect a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[Data content]
This function is available for playback
contents stored in USB memory or data disc.
[Auto]: Outputs 24 Hz video signals only
when you connect a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[Network content]
This function is available for playback
contents from other network, such as Home
Network, etc.
[Auto]: Outputs 24 Hz video signals only
when you connect a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[4K Upscale Setting]
[Auto1]: When playing back video other than
4K, outputs 2K (1920 × 1080) video signals if
connected to Sony 4K-compatible
equipment, and outputs 4K video signals if
connected to non-Sony 4K-compatible
equipment.
The signals are upconverted to 4K video
signals by the equipment.
[Auto2]: Automatically outputs 4K video
signals when you connect 4K-compatible
equipment.
[Off]: Turns off the function.
• If your Sony equipment is not detected when
[Auto1] is selected, the setting will have the
same effect as the [Auto2] setting.
• When playing back photos or playing back
video through network services, the same
effect as the [Auto2] setting is applied
regardless of this setting.
• During 3D playback of 3D video, the same
effect as the [Off] setting is applied regardless
of this setting.
• Depending on the connected equipment and
combination with other settings, the display
may not match this setting.
[YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the connected
TV type, and switches to the matching color
setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB]: Outputs RGB video signals.