About the infolithium battery pack – Sony BRAVIA BZ40J 100" Class 4K UHD HDR Commercial Monitor User Manual
Page 261
Digital 4K Video Camera Recorder
FDR-AX43/AX43A/AX45/AX45A/AX60
About the InfoLITHIUM battery pack
This product operates only with an InfoLITHIUM V series battery packs. InfoLITHIUM V series battery packs have the
mark.
What is an InfoLITHIUM battery pack?
An InfoLITHIUM battery pack is a lithium-ion battery pack that has functions for communicating information related to
operating conditions between this product and an AC Adaptor/charger (sold separately).
The InfoLITHIUM battery pack calculates the power consumption according to the operating conditions of this
product, and displays the remaining battery capacity in minutes.
To charge the battery pack
Be sure to charge the battery pack before you start using this product.
We recommend that you charge the battery pack in an ambient temperature range of 10 ˚C to 30 ˚C (50 °F to 86 °F)
until the POWER/CHG (charge) lamp turns off. If you charge the battery pack outside of this temperature range, you
may not be able to charge it efficiently.
The POWER/CHG (charge) lamp flashes during charging under the following conditions.
The battery pack is not inserted correctly.
The battery pack is damaged.
The temperature of the battery pack is low.
Remove the battery pack from this product and put it in a warm place.
The temperature of the battery pack is high.
Remove the battery pack from this product and put it in a cool place.
To use the battery pack effectively
Battery pack performance decreases when the ambient temperature is 10 ˚C (50 °F) or below, and the length of time
you can use the battery pack becomes shorter. If that happens, one of the following is recommended to enable
longer use of the battery pack:
Put the battery pack in a pocket to warm it up, and install it on this product immediately before you start shooting.
Use a large capacity battery pack: NP-FV100A (sold separately).
Frequent use of the LCD monitor or a frequent playback, fast forward or reverse operation wears out the battery pack
faster.
Be sure to close the LCD monitor when not recording or playing back on this product. The battery pack is also
consumed when this product is in recording standby or playback pause.
Have spare battery packs ready for 2 or 3 times the expected recording time, and make trial recordings before
making the actual recording.
Do not expose the battery pack to water. The battery pack is not water resistant.
About the remaining battery power indicator
When the power goes off even though the remaining battery power indicator indicates that the battery pack has
enough power to operate, charge the battery pack fully again. Remaining battery power will be indicated correctly.
Note, however, that the battery indication will not be restored if it is used in high temperatures for a long time, or if left
in a fully charged state, or when the battery pack is frequently used.
Depending on the operating conditions or ambient temperature, the
icon that indicates a low battery may flash
even if there are still 20 minutes of power remaining.
261