Video – Sony BDP-S1700 Blu-ray Disc Player User Manual
Page 50
50
GB
• You cannot listen to the sound of a device
connected to the receiver while TV input
is selected on the receiver. Be sure to
change the input of the receiver to HDMI
if you want to watch a program on a
device connected via HDMI connection to
the receiver.
• Check that the selected digital audio
input jack is not assigned to another
input.
The left and right sound is
unbalanced or reversed.
• Check that the speakers and device are
connected correctly and securely.
• Adjust the sound level parameters using
[Level] in the [Speaker Setting] menu.
Dolby Digital or DTS multi-channel
sound is not reproduced.
• Check that the DVD, etc., you are playing
is recorded in Dolby Digital or DTS format.
• When connecting the DVD player, etc., to
the digital audio input jacks of this
receiver, make sure the digital audio
output setting of the connected device is
available.
• Set “AUDIO.OUT” to “AMP” in the
“
• You can only enjoy High Bitrate Audio
(DTS-HD Master Audio and Dolby
TrueHD) and object-based audio formats
(DTS:X and Dolby Atmos) with an HDMI
connection.
• If your device has digital audio output
setting, check that the setting is not set
to PCM.
The surround effect cannot be
obtained.
• Be sure to select the optimal sound field
for the content. For details on the sound
fields, see “Selectable sound fields and
their effects” (page 40).
• Dolby Surround and Neural:X do not
work when the speaker pattern is set to
“2.0” or “2.1”.
Image and sound are not output from
the TV when the receiver is in
standby mode.
• Set “
ON”, and then set “STBY.THRU” to “ON” or
“AUTO”.
• Turn on the receiver, then select the input
to which the playing device is connected.
• If connected to devices other than those
manufactured by Sony that support the
Control for HDMI function, set “
“CTRL.HDMI” – “CTRL ON”.
The sound is output from both the
receiver and the TV.
• Mute the sound of the receiver or the TV.
There is a time gap between the
visual display on the TV and the
audio output from the speaker
connected to the receiver.
• Press AMP MENU and change the “A/V
SYNC” settings in the “
• Adjust the A/V Sync settings on the TV.
For details, refer to the operating
instructions of the TV.
No image appears on the TV screen.
• Try pressing the input button on the
remote control or turning INPUT
SELECTOR on the receiver to select the
input to which you want to watch.
• Set your TV to the appropriate input
mode.
• Make sure that cables are correctly and
securely connected to devices.
• Disconnect the HDMI cable from the
receiver and TV and then reconnect the
cable.
• Set “SIG. FMT.” of the selected input to
“STANDARD” in the “
• Some playback devices need to be set
up. Refer to the operating instructions
supplied with each device.
Video