Sony BDP-BX370 Network Blu-ray Disc Player - Manual (Page 11)

11 EN
Safety and Regulatory Booklet
5-047-111- 11 (1)
EN
Subjecting the AC power cord to wear and/
or abuse can damage the AC power cord
and your TV.
☐ Do not place the TV where the power
cord can be easily pinched, bent, twisted,
or catch your feet.
☐ Do not allow anything to rest on or roll
over the cord.
☐ Before connecting cables, be sure to
unplug the AC power cord for your
safety.
☐ Do not move the TV with the AC power
cord (or other cables such as audio and
video) connected.
☐ Use only an original Sony AC power
cord with your TV; no brand
substitution is allowed.
☐ Do not use AC power cord supplied with
the TV with any other equipment.
☐ Never use a damaged AC
power cord. A damaged AC
power cord can cause a
short-circuit, which may
result in a fire or electric
shock.
Do not use a damaged or poorly
fitting AC power outlet as your
TV’s power source.
☐ Insert the plug fully into the
outlet. If it is loose, it may
cause arcing and result in a
fire.
☐ Do not overload the same
AC power outlet.
Unplugging the AC power cord
from the wall outlet will completely remove
power from the TV.
☐ As the TV set is not disconnected from
the AC power cord when the TV set is
just turned off, pull the plug from the
AC power outlet to disconnect the TV
set completely.
Clean the AC power plug
Unplug the AC power plug
and clean it occasionally to
avoid dust from
accumulating. While
cleaning, look for signs of damage. A
damaged AC power cord should never be
used.
ACCESSORIES
Keep small accessories out of children’s
reach. Use only the specified accessories
with this TV.
Volume Adjustment
☐ When using headphones,
adjust the volume to avoid
excessive audio levels from
causing possible hearing
loss.
SCREEN (For LCD TV only):
☐ Although the LCD screen is made with
high-precision technology and has
effective pixels of 99.99% or more, black
dots or bright points of light (red, blue,
or green) may appear constantly on the
LCD screen. This is a structural property
of the LCD panel and is not a
malfunction.
☐ The LCD screen is made with high-
precision technology and to achieve a
high level of performance and picture
quality, this TV’s backlight setting is set
to maximize the brightness of the TV.
However, uneven brightness may be
observed when the LCD TV is viewed in
a dark ambient without an input source
or with a blank screen. This condition is
normal and not a malfunction of the TV.
Changing the Picture mode, Backlight
setting, enabling the Light Sensor (if
applicable), or turning on the Power
Management will improve this condition.
☐ To avoid damaging the LCD panel, do
not expose the LCD screen to direct
sunlight.
☐ Do not push or scratch the LCD screen,
or place objects on top of the TV. The
images may be uneven or the LCD panel
may be damaged.
☐ If the TV is used in a cold place, the
picture may smear or become dark. This
does not indicate a failure. These
phenomena improve as the temperature
rises.