Samsung QET 85" Class 4K UHD Commercial LED Display User Manual
Page 95
95
Screen issue
The screen appears unstable and shaky.
Check that the resolution and frequency of the PC and graphics card are set within a range
compatible with the product. Then, change the screen settings if required by referring to 'Preset
Timing Modes'.
There are shadows or ghost images left on the screen.
The screen is too bright. The screen is too dark.
Go to
Picture
and adjust the
Brightness
and
Contrast
settings.
Screen color is inconsistent.
Go to
Picture
→
Advanced Settings
and adjust the
Color Space Settings
settings.
White does not really look white.
Go to
Picture
→
Advanced Settings
and adjust the
White Balance
settings.
There is no image on the screen and the power indicator
blinks every 0.5 to 1 second.
The display is turned off to save energy.
Press any key on the keyboard or move the mouse to return to the previous screen.
The product will turn off automatically.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off after
10 to 15 minutes.
The screen display does not look normal.
Encoded video content may cause the display to appear corrupted in scenes featuring fast
moving objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not
mean the product is defective.
A cell phone within a distance of one-meter radius may cause static on analog and digital
products.
The brightness and color do not look normal.
Go to
Picture
and adjust the screen settings such as
Color
,
Brightness
and
Sharpness
.
Go to
System
and adjust the
Eco Solution
settings.
Reset the screen settings to the default settings. (
)
"
The power indicator may not be
supported depending on the
model.