Samsung QET 85" Class 4K UHD Commercial LED Display - Manual (Page 79)

79
2nd 3rd Description
IPv6 Enable or disable IPv6.
" This function may not be supported depending on the model.
IPv6 Status Check the status of your IPv6 Internet connection.
" This function may not be supported depending on the model.
Server Network Settings Connect to Server Connect to MagicInfo server.
" If you do use the TLS option, the server is configured to use https and data transfer is encrypted. (Port number: 7002)
" If you don't use the TLS option, enter the server IP address and port number. Use 7001 as the port number. (If you are
unable to connect to the server using port number 7001, check with your server administrator to find the correct port
number and then change the port number.)
" Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to the server using port
number 7001, check with your server administrator to find the correct port number and then change the port number.)
" For the MagicInfo Server user guide, visit the following website: http://displaysolutions.samsung.com → Support →
Resources → MagicInfo Web Manual.
MagicInfo Mode Select the appropriate MagicInfo Mode depending on the environment where you are using the product.
" Supported content types may be limited while MagicInfo Mode is set to Lite .
" This function may not be supported depending on the model.
Server Access Allow or deny access to MagicInfo server.
FTP Mode Specify the FTP operating mode.
Proxy Server Set up your proxy server connection and related functions.
" Address / Port / ID and Password are enabled only when Proxy Server is set to On .
Device Name Select or enter a device name.
This name can be shown on network device over the network.