Samsung CJ791 34" 21:9 Curved FreeSync VA Monitor - Manual (Page 32)

32
Source
PIP Mode (available in PIP mode( Size / / ))
Select the source for each screen.
―
The input source for the main screen changes.
―
With the exception of the current input source, the other two input sources can be selected.
―
The screen may flicker if the input signal is unstable.
―
When the Function Key Guide appears, move the JOG button LEFT to select the icon and then press the
JOG button. The main screen will switch in the order DisplayPort → HDMI → Thunderbolt3 / USB-C .
PBP Mode (available in PBP mode( Size ))
Select input sources for the devices displayed on the main and sub screens.
―
The input source for the main screen changes.
―
The screen may flicker if the input signal is unstable.
―
When the input signal of the left and right screens are the same, the operation cannot be performed.
―
When the Function Key Guide appears, move the JOG button LEFT to select the icon and then press the
JOG button. The main screen will switch in the order DisplayPort → HDMI → Thunderbolt3 / USB-C .
Picture Size
PIP Mode (available in PIP mode ( Size / / ))
Select the image size for sub-screen.
In PC mode
• Auto : Display the picture according to the aspect ratio of the each screen input source.
• Wide : Display the picture in full screen regardless of the aspect ratio of the each screen input source.
In AV mode
• 4:3 : Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard
broadcasts.
• 16:9 : Display the picture of the sub-screen with an aspect ratio of 16:9.
• Screen Fit : Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
―
The function may not be supported depending on the ports provided with the product.
―
Changing the screen size is available when the following conditions are satisfied.
―
A digital output device is connected using the HDMI/DP cable.
―
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support
all of these signals.).
―
This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to AV .