beautypg.com

Picture size, Screen adjustment, Calibration report – Samsung CJ791 34" 21:9 Curved FreeSync VA Monitor User Manual

Page 29: Picture size 29, Screen adjustment 29, Calibration report 29, 29 picture size

background image

29

Picture Size

Change the picture size.

This menu is not available when

PIP/PBP Mode

is set to

On

and the

Size

is set to

(PBP Mode).

This option is not available when

FreeSync

is enabled.

In PC mode

Auto

: Display the picture according to the aspect ratio of the input source.

Wide

: Display the picture in full screen regardless of the aspect ratio of the input source.

In AV mode

4:3

: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.

16:9

: Display the picture with an aspect ratio of 16:9.

21:9

: Display the picture with an aspect ratio of 21:9.

Screen Fit

: Display the picture with the original aspect ratio without cutting off.

The function may not be supported depending on the ports provided with the product.

Changing the screen size is available when the following conditions are satisfied.

A digital output device is connected using the HDMI/DP cable.

The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).

This can only be set when the external input is connected through HDMI/DP and

PC/AV Mode

is set to

AV

.

(

DisplayPort

/

HDMI

: This option is available when

FreeSync

is disabled)

Screen Adjustment

This menu is only available when

Picture Size

is set to

Screen Fit

in

AV

Mode.

When a 480P or 576P or 720P or 1080P signal is input in

AV

mode and the monitor can display normally, select

Screen Fit

to adjust horizontal position in 0-6 levels.

Configuring H-Position & V-Position

H-Position

: Move the screen to the left or right.

V-Position

: Move the screen up or down.

Calibration Report

The data from this report are measured at the time of shipment.

The measurements may vary according to the measuring equipment, measuring location, system
environment (e.g. computer, graphic board, etc) and other variables.

Input signal:

HDMI

Each measurement from this report is based on the

Custom

mode at the time of shipment.

This report is not provided on the menu of some products, but in an separate hardcopy report
instead.