Epson Artisan EMP-830/EMP-835 - Manual (Page 8)

7
EMP Monitor Operation Guide
Main EMP Monitor Window
Understanding the Projector List
The projector list uses the following icons to show the projector statuses.
The projector information that is generated when a problem is detected is
stored until EMP Monitor is closed. The EMP Monitor displays will not be
updated automatically even if the projector status returns to normal. Click
the "Refresh" button in the main window to update the status.
Status: Shows the projector status.
Power on and normal status
Power off and normal status
Power on and abnormal status
Power off and abnormal status
Network error (such as not connected to network or
power cable not connected)
Name: Shows the projector name.
Input source: Shows the selected input source.
Computer, Computer1 or InputA
Computer2 or InputB
S-Video
Video
D4 (Digital)
DVI or HDMI (Digital)
Error information: If an error occurs with a projector, the following
icons are used to show the status.
End of lamp life warning
Replace with a new lamp.
s " Replacing the Lamp "
in the "Replacing
Consumables" section of
the User's Guide.
Lamp problem Refer to "Reading the
Indicators" to remedy the
problem.
s " Problem Solving " in
the User's Guide
High internal temperature
(overheating)
Temperature warning
Internal problem
Fan problem
Temperature sensor
problem